Apache HTTP Server Version 2.0
Apache HTTP Server Version 2.0
| Description: | A collection of directives that are implemented by more than one multi-processing module (MPM) |
|---|---|
| Status: | MPM |
| Description: | Method that Apache uses to serialize multiple children accepting requests on network sockets |
|---|---|
| Syntax: | AcceptMutex Default|method |
| Default: | AcceptMutex Default |
| Context: | server config |
| Status: | MPM |
| Module: | leader, perchild, prefork, threadpool, worker |
The AcceptMutex directives sets the
method that Apache uses to serialize multiple children accepting
requests on network sockets. Prior to Apache 2.0, the method was
selectable only at compile time. The optimal method to use is
highly architecture and platform dependent. For further details,
see the performance tuning
documentation.
If this directive is set to Default, then the
compile-time selected default will be used. Other possible
methods are listed below. Note that not all methods are
available on all platforms. If a method is specified which is
not available, a message will be written to the error log
listing the available methods.
flockflock(2) system call to lock the
file defined by the LockFile directive.fcntlfcntl(2) system call to lock the
file defined by the LockFile directive.posixsempthreadsysvsemIf you want to find out the compile time chosen default
for your system, you may set your LogLevel to debug. Then the default AcceptMutex will be written into the ErrorLog.
| Description: | Define the non-privileged account on BS2000 machines |
|---|---|
| Syntax: | BS2000Account account |
| Context: | server config |
| Status: | MPM |
| Module: | perchild, prefork |
| Compatibility: | Only available for BS2000 machines |
The BS2000Account directive is available for
BS2000 hosts only. It must be used to define the account number for
the non-privileged apache server user (which was configured using the
User directive). This is
required by the BS2000 POSIX subsystem (to change the underlying BS2000
task environment by performing a sub-LOGON) to prevent CGI scripts
from accessing resources of the privileged account which started the
server, usually SYSROOT.
Only one BS2000Account directive can be used.
| Description: | Directory where Apache attempts to switch before dumping core |
|---|---|
| Syntax: | CoreDumpDirectory directory |
| Default: | See usage for the default setting |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, mpm_winnt, perchild, prefork, threadpool, worker |
This controls the directory to which Apache attempts to
switch before dumping core. The default is in the
ServerRoot directory, however
since this should not be writable by the user the server runs
as, core dumps won't normally get written. If you want a core
dump for debugging, you can use this directive to place it in a
different location.
If Apache starts as root and switches to another user, the
Linux kernel disables core dumps even if the directory is
writable for the process. Apache (2.0.46 and later) reenables core dumps
on Linux 2.4 and beyond, but only if you explicitly configure a CoreDumpDirectory.
| Description: | Group under which the server will answer requests |
|---|---|
| Syntax: | Group unix-group |
| Default: | Group #-1 |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, mpmt_os2, perchild, prefork, threadpool, worker |
| Compatibility: | Only valid in global server config since Apache 2.0 |
The Group directive sets the group under
which the server will answer requests. In order to use this
directive, the server must be run initially as root. If
you start the server as a non-root user, it will fail to change to the
specified group, and will instead continue to run as the group of the
original user. Unix-group is one of:
# followed by a group number.
Group www-group
It is recommended that you set up a new group specifically for
running the server. Some admins use user nobody,
but this is not always possible or desirable.
Don't set Group (or User) to root unless
you know exactly what you are doing, and what the dangers are.
Special note: Use of this directive in <VirtualHost> is no longer supported. To
configure your server for suexec use
SuexecUserGroup.
| Description: | IP addresses and ports that the server listens to |
|---|---|
| Syntax: | Listen [IP-address:]portnumber |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, mpm_netware, mpm_winnt, mpmt_os2, perchild, prefork, threadpool, worker |
| Compatibility: | Required directive since Apache 2.0 |
The Listen directive instructs Apache to
listen to only specific IP addresses or ports; by default it
responds to requests on all IP interfaces. Listen
is now a required directive. If it is not in the config file, the
server will fail to start. This is a change from previous versions
of Apache.
The Listen directive tells the server to
accept incoming requests on the specified port or address-and-port
combination. If only a port number is specified, the server listens to
the given port on all interfaces. If an IP address is given as well
as a port, the server will listen on the given port and
interface.
Multiple Listen directives may be used to
specify a number of addresses and ports to listen to. The server will
respond to requests from any of the listed addresses and ports.
For example, to make the server accept connections on both port 80 and port 8000, use:
Listen 80
Listen 8000
To make the server accept connections on two specified interfaces and port numbers, use
Listen 192.170.2.1:80
Listen 192.170.2.5:8000
IPv6 addresses must be surrounded in square brackets, as in the following example:
Listen [fe80::a00:20ff:fea7:ccea]:80
| Description: | Maximum length of the queue of pending connections |
|---|---|
| Syntax: | ListenBacklog backlog |
| Default: | ListenBacklog 511 |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, mpm_netware, mpm_winnt, mpmt_os2, perchild, prefork, threadpool, worker |
The maximum length of the queue of pending connections.
Generally no tuning is needed or desired, however on some
systems it is desirable to increase this when under a TCP SYN
flood attack. See the backlog parameter to the
listen(2) system call.
This will often be limited to a smaller number by the operating system. This varies from OS to OS. Also note that many OSes do not use exactly what is specified as the backlog, but use a number based on (but normally larger than) what is set.
| Description: | Location of the accept serialization lock file |
|---|---|
| Syntax: | LockFile filename |
| Default: | LockFile logs/accept.lock |
| Context: | server config |
| Status: | MPM |
| Module: | leader, perchild, prefork, threadpool, worker |
The LockFile directive sets the path to
the lockfile used when Apache is used with an AcceptMutex value of either
fcntl or flock. This directive should
normally be left at its default value. The main reason for changing
it is if the logs directory is NFS mounted, since
the lockfile must be stored on a local disk. The PID
of the main server process is automatically appended to the
filename.
It is best to avoid putting this file in a world writable
directory such as /var/tmp because someone could create
a denial of service attack and prevent the server from starting by
creating a lockfile with the same name as the one the server will try
to create.
| Description: | Maximum number of child processes that will be created to serve requests |
|---|---|
| Syntax: | MaxClients number |
| Default: | See usage for details |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, prefork, threadpool, worker |
The MaxClients directive sets the limit
on the number of simultaneous requests that will be served. Any
connection attempts over the MaxClients
limit will normally be queued, up to a number based on the
ListenBacklog
directive. Once a child process is freed at the end of a different
request, the connection will then be serviced.
For non-threaded servers (i.e., prefork),
MaxClients translates into the maximum
number of child processes that will be launched to serve requests.
The default value is 256; to increase it, you must also raise
ServerLimit.
For threaded and hybrid servers (e.g. beos
or worker) MaxClients restricts
the total number of threads that will be available to serve clients.
The default value for beos is 50. For
hybrid MPMs the default value is 16 (ServerLimit) multiplied by the value of
25 (ThreadsPerChild). Therefore, to increase MaxClients to a value that requires more than 16 processes,
you must also raise ServerLimit.
| Description: | Maximum amount of memory that the main allocator is allowed to hold without calling free() |
|---|---|
| Syntax: | MaxMemFree KBytes |
| Default: | MaxMemFree 0 |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, mpm_netware, prefork, threadpool, worker |
The MaxMemFree directive sets the
maximum number of free Kbytes that the main allocator is allowed
to hold without calling free(). When not set, or when set
to zero, the threshold will be set to unlimited.
| Description: | Limit on the number of requests that an individual child server will handle during its life |
|---|---|
| Syntax: | MaxRequestsPerChild number |
| Default: | MaxRequestsPerChild 10000 |
| Context: | server config |
| Status: | MPM |
| Module: | leader, mpm_netware, mpm_winnt, mpmt_os2, perchild, prefork, threadpool, worker |
The MaxRequestsPerChild directive sets
the limit on the number of requests that an individual child
server process will handle. After
MaxRequestsPerChild requests, the child
process will die. If MaxRequestsPerChild is
0, then the process will never expire.
The default value for mpm_netware and
mpm_winnt is 0.
Setting MaxRequestsPerChild to a
non-zero limit has two beneficial effects:
For KeepAlive requests, only
the first request is counted towards this limit. In effect, it
changes the behavior to limit the number of connections per
child.
| Description: | Maximum number of idle threads |
|---|---|
| Syntax: | MaxSpareThreads number |
| Default: | See usage for details |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, mpm_netware, mpmt_os2, perchild, threadpool, worker |
Maximum number of idle threads. Different MPMs deal with this directive differently.
For perchild the default is
MaxSpareThreads 10. This MPM monitors the number of
idle threads on a per-child basis. If there are too many idle
threads in that child, the server will begin to kill threads
within that child.
For worker, leader and threadpool the default is MaxSpareThreads 250.
These MPMs deal with idle threads on a server-wide basis. If there
are too many idle threads in the server then child processes are
killed until the number of idle threads is less than this number.
For mpm_netware the default is
MaxSpareThreads 100. Since this MPM runs a
single-process, the spare thread count is also server-wide.
beos and mpmt_os2 work
similar to mpm_netware. The default for
beos is MaxSpareThreads 50. For
mpmt_os2 the default value is 10.
The range of the MaxSpareThreads value
is restricted. Apache will correct the given value automatically
according to the following rules:
perchild requires MaxSpareThreads to be less or equal than ThreadLimit.mpm_netware wants the value to be greater than
MinSpareThreads.leader, threadpool and
worker the value must be greater or equal than
the sum of MinSpareThreads
and ThreadsPerChild.| Description: | Minimum number of idle threads available to handle request spikes |
|---|---|
| Syntax: | MinSpareThreads number |
| Default: | See usage for details |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, mpm_netware, mpmt_os2, perchild, threadpool, worker |
Minimum number of idle threads to handle request spikes. Different MPMs deal with this directive differently.
perchild uses a default of
MinSpareThreads 5 and monitors the number of idle
threads on a per-child basis. If there aren't enough idle threads
in that child, the server will begin to create new threads within
that child. Thus, if you set NumServers to 10 and a MinSpareThreads value of 5, you'll have
at least 50 idle threads on your system.
worker, leader and
threadpool use a default of MinSpareThreads
75 and deal with idle threads on a server-wide basis. If
there aren't enough idle threads in the server then child
processes are created until the number of idle threads is greater
than number.
mpm_netware uses a default of
MinSpareThreads 10 and, since it is a single-process
MPM, tracks this on a server-wide bases.
beos and mpmt_os2 work
similar to mpm_netware. The default for
beos is MinSpareThreads 1. For
mpmt_os2 the default value is 5.
| Description: | File where the server records the process ID of the daemon |
|---|---|
| Syntax: | PidFile filename |
| Default: | PidFile logs/httpd.pid |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, mpm_winnt, mpmt_os2, perchild, prefork, threadpool, worker |
The PidFile directive sets the file to
which the server records the process id of the daemon. If the
filename is not absolute then it is assumed to be relative to the
ServerRoot.
PidFile /var/run/apache.pid
It is often useful to be able to send the server a signal,
so that it closes and then re-opens its ErrorLog and TransferLog, and
re-reads its configuration files. This is done by sending a
SIGHUP (kill -1) signal to the process id listed in the
PidFile.
The PidFile is subject to the same
warnings about log file placement and security.
As of Apache 2 it is recommended to use only the apachectl script for (re-)starting or stopping the server.
| Description: | Location of the file used to store coordination data for the child processes |
|---|---|
| Syntax: | ScoreBoardFile file-path |
| Default: | ScoreBoardFile logs/apache_status |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, mpm_winnt, perchild, prefork, threadpool, worker |
Apache uses a scoreboard to communicate between its parent and child processes. Some architectures require a file to facilitate this communication. If the file is left unspecified, Apache first attempts to create the scoreboard entirely in memory (using anonymous shared memory) and, failing that, will attempt to create the file on disk (using file-based shared memory). Specifying this directive causes Apache to always create the file on the disk.
ScoreBoardFile /var/run/apache_status
File-based shared memory is useful for third-party applications that require direct access to the scoreboard.
If you use a ScoreBoardFile then
you may see improved speed by placing it on a RAM disk. But be
careful that you heed the same warnings about log file placement
and security.
| Description: | TCP buffer size |
|---|---|
| Syntax: | SendBufferSize bytes |
| Default: | SendBufferSize 0 |
| Context: | server config |
| Status: | MPM |
| Module: | beos, leader, mpm_netware, mpm_winnt, mpmt_os2, perchild, prefork, threadpool, worker |
The server will set the TCP buffer size to the number of bytes specified. Very useful to increase past standard OS defaults on high speed high latency (i.e., 100ms or so, such as transcontinental fast pipes).
If set to the value of 0, the server will use the
OS deault.
| Description: | Upper limit on configurable number of processes |
|---|---|
| Syntax: | ServerLimit number |
| Default: | See usage for details |
| Context: | server config |
| Status: | MPM |
| Module: | leader, perchild, prefork, threadpool, worker |
For the prefork MPM, this directive sets the
maximum configured value for MaxClients for the lifetime of the
Apache process. For the worker MPM, this directive
in combination with ThreadLimit sets
the maximum configured value for MaxClients for the lifetime of the
Apache process. Any attempts to change this directive during a
restart will be ignored, but MaxClients can be modified during
a restart.
Special care must be taken when using this directive. If
ServerLimit is set to a value much higher
than necessary, extra, unused shared memory will be allocated. If
both ServerLimit and MaxClients are set to values
higher than the system can handle, Apache may not start or the
system may become unstable.
With the prefork MPM, use this directive only
if you need to set MaxClients higher than 256 (default).
Do not set the value of this directive any higher than what you
might want to set MaxClients to.
With worker, leader and
threadpool use this directive only
if your MaxClients and
ThreadsPerChild
settings require more than 16 server processes (default). Do not set
the value of this directive any higher than the number of server
processes required by what you may want for MaxClients and ThreadsPerChild.
With the perchild MPM, use this directive only
if you need to set NumServers higher than 8 (default).
There is a hard limit of ServerLimit 20000 compiled
into the server. This is intended to avoid nasty effects caused by
typos.
| Description: | Number of child server processes created at startup |
|---|---|
| Syntax: | StartServers number |
| Default: | See usage for details |
| Context: | server config |
| Status: | MPM |
| Module: | leader, mpmt_os2, prefork, threadpool, worker |
The StartServers directive sets the
number of child server processes created on startup. As the number
of processes is dynamically controlled depending on the load,
there is usually little reason to adjust this parameter.
The default value differs from MPM to MPM. For
leader, threadpool and
worker the default is StartServers 3.
For prefork defaults to 5 and for
mpmt_os2 to 2.
| Description: | Number of threads created on startup |
|---|---|
| Syntax: | StartThreads number |
| Default: | See usage for details |
| Context: | server config |
| Status: | MPM |
| Module: | beos, mpm_netware, perchild |
Number of threads created on startup. As the number of threads is dynamically controlled depending on the load, there is usually little reason to adjust this parameter.
For perchild the default is StartThreads
5 and this directive tracks the number of threads per
process at startup.
For mpm_netware the default is
StartThreads 50 and, since there is only a single
process, this is the total number of threads created at startup to
serve requests.
For beos the default is StartThreads
10. It also reflects the total number of threads created
at startup to serve requests.
| Description: | Sets the upper limit on the configurable number of threads per child process |
|---|---|
| Syntax: | ThreadLimit number |
| Default: | See usage for details |
| Context: | server config |
| Status: | MPM |
| Module: | leader, mpm_winnt, perchild, threadpool, worker |
| Compatibility: | Available for mpm_winnt in Apache 2.0.41
and later |
This directive sets the maximum configured value for ThreadsPerChild for the lifetime
of the Apache process. Any attempts to change this directive
during a restart will be ignored, but ThreadsPerChild can be modified
during a restart up to the value of this directive.
Special care must be taken when using this directive. If
ThreadLimit is set to a value much higher
than ThreadsPerChild,
extra unused shared memory will be allocated. If both
ThreadLimit and ThreadsPerChild are set to values
higher than the system can handle, Apache may not start or the
system may become unstable. Do not set the value of this directive
any higher than your greatest predicted setting of ThreadsPerChild for the
current run of Apache.
The default value for ThreadLimit is
1920 when used with mpm_winnt and
64 when used with the others.
There is a hard limit of ThreadLimit 20000 (or
ThreadLimit 15000 with mpm_winnt)
compiled into the server. This is intended to avoid nasty effects
caused by typos.
| Description: | Number of threads created by each child process |
|---|---|
| Syntax: | ThreadsPerChild number |
| Default: | See usage for details |
| Context: | server config |
| Status: | MPM |
| Module: | leader, mpm_winnt, threadpool, worker |
This directive sets the number of threads created by each
child process. The child creates these threads at startup and
never creates more. If using an MPM like mpm_winnt,
where there is only one child process, this number should be high
enough to handle the entire load of the server. If using an MPM
like worker, where there are multiple child processes,
the total number of threads should be high enough to handle
the common load on the server.
The default value for ThreadsPerChild is
64 when used with mpm_winnt and
25 when used with the others.
| Description: | The userid under which the server will answer requests |
|---|---|
| Syntax: | User unix-userid |
| Default: | User #-1 |
| Context: | server config |
| Status: | MPM |
| Module: | leader, perchild, prefork, threadpool, worker |
| Compatibility: | Only valid in global server config since Apache 2.0 |
The User directive sets the user ID as
which the server will answer requests. In order to use this
directive, the server must be run initially as root.
If you start the server as a non-root user, it will fail to change
to the lesser privileged user, and will instead continue to run as
that original user. If you do start the server as root,
then it is normal for the parent process to remain running as root.
Unix-userid is one of:
The user should have no privileges that result in it being
able to access files that are not intended to be visible to the
outside world, and similarly, the user should not be able to
execute code that is not meant for HTTP requests. It is
recommended that you set up a new user and group specifically for
running the server. Some admins use user nobody, but
this is not always desirable, since the nobody user
can have other uses on the system.
Don't set User (or Group) to root unless
you know exactly what you are doing, and what the dangers are.
With the perchild MPM, which is intended to
server virtual hosts run under different user IDs, the
User directive defines the user ID for the
main server and the fallback for <VirtualHost> sections without an
AssignUserID directive.
Special note: Use of this directive in <VirtualHost> is no longer supported. To
configure your server for suexec use
SuexecUserGroup.